Research
Well Screens and Gravel Packs
The purpose of well screens and gravel packs is to maintain open access within the aquifer ensuring that thorough development of the well is not impeded by sand. Where a well draws on unconsolidated sands and gravels, or other friable materials. The production section is characterized by mainly medium to coarse grained sandstone, the uniformity coefficient efficient ranging from 1.44 to 2.14, and the installation of a screen and pack is essential. The use of correctly designed equipment is important and this paper represents a review of the diverse types available, but does not set out to make any recommendations. These type of screen, commonly known as wire–wrap is usually manufactured from type 304 stainless steel, galvanized steel and coated screens have been introduced seeking to inhibit corrosion resistant alloy. The surface area of opening of this type of screen used with aperture sized 0.75 mm necessary to control fine sands from thick aquifer. The screen entrance velocity it was calculated 0.030 m/s.
Air Drilling Improves Efficiency in Wellbores in Disi Water Field Project
In many of today’s most challenging land drilling applications, the lower weight on bit and hydrostatic head, achieved with air drilling methods with foam are consider a key to reducing drilling time and costs which can improve efficiency . These systems improve rates of penetration, minimize problems such as differential sticking, lost circulation. Air drilling with foam, also drills a straight hole in vertical sections, and reduces deviation by comparing with conventional drilling methods.
