Designing and Valuating System on Dependability Analysis of Cluster-Based Multiprocessor System

Pulicherla Radhika; Dr. Sudarson Jena

Designing and Valuating System on Dependability Analysis of Cluster-Based Multiprocessor System

Pulicherla Radhika *

Contact

Dr. Sudarson Jena

Contact

Designing and Valuating System on Dependability Analysis of Cluster-Based Multiprocessor System

Article Fingerprint

ReserarchID

CST252UV

Designing and Valuating System on Dependability Analysis of Cluster-Based Multiprocessor System Banner

Key Research Insights

Synthesized scholarly intelligence & interactive research assistant

This converted HTML version may contain rendering inconsistencies. Please refer to the PDF for the authoritative version, or click here to provide feedback.

Abstract

Analysis of dependability is a significant stage in structuring and examining the safety of protection systems and computer systems. The introduction of virtual machines and multiprocessors leads to increasing the faults of the system, particularly for the failures that are software-induced, affecting the overall dependability. Also, it is different for the successful operation of the safety system at any dynamic stage, since there is a tremendous distinction in the rate of failure among the failures that are induced by the software and the hardware. Thus this paper presents a review or different dependability analysis techniques employed in multiprocessor systems.

References

25 Cites in Article

Reference Format

V Singhal (2011). Distributed systems computing upgradation & reliability tecnia.
S Sutar,J Sawant,J Jadhav (2006). Task scheduling for multiprocessor systems using memetic algorithms.
Waqar Ahmad,Osman Hasan,Sofiène Tahar (2016). Formal Dependability Modeling and Analysis: A Survey.
F Zhu,H Jin,D Zou,P Qin (2014). Dependability analysis for fault tolerant computer systems using dynamic and graphs.
S Distefano,A Puliafito (2009). Dependability evaluation with dynamic reliability block diagrams and dynamic fault trees.
H Nirmala,H Girijamma (2014). Fuzzy Priority Scheduling Algorithm for Multiprocessor Systems.
L,M Zhou,S Sun,X Lian,G Liu,J,Wang (2019). Probabilistic diagnosis of clustered faults for hypercube-based multiprocessor system.
Abhaya Samal,Rajib Mall,Chittaranjan Tripathy (2014). Fault tolerant scheduling of hard real-time tasks on multiprocessor system using a hybrid genetic algorithm.
Golbarg Zarinzad,Amir Rahmani,Nikta Dayhim (2008). A Novel Intelligent Algorithm for Fault-Tolerant Task Scheduling in Real-Time Multiprocessor Systems.
H Peeg (2015). Fault Tolerant Global Scheduling for Multiprocessor Hard Real Time Systems.
N Chatterjee,S Paul,S Chattopadhyay (2017). Fault-tolerant dynamic task mapping and scheduling for network-on-chip-based multicore platform.
V Berten,J Goossens,E Jeannot (2006). A probabilistic approach for fault tolerant multiprocessor real-time scheduling.
Gergely Pintér,Henrique Madeira,Marco Vieira,István Majzik,András Pataricza (2005). A Data Mining Approach to Identify Key Factors in Dependability Experiments.
F Pournaghdali,A Rajabzadeh,M Ahmadi (2013). VHDLSFI: A simulation-based multi-bit fault injection for dependability analysis.
J Grinschgl,A Krieg,C Steyer,R Weiss,H Bock,J Haid,C …& Ulbricht (2013). Case study on multiple fault dependability and security valuations.
Khanh Nguyen,Julie Beugin,Marion Berbineau,Mohamed Kassab (2014). Modelling Communication Based Train Control System for Dependability Analysis of the LTE Communication Network in Train Control Application.
K Suyama,N Sebe (2014). Dependability analysis of fault-tolerant servo systems using limited integrators.
A Bertolino,A Calabro,F Di Giandomenico,N Nostro (2011). Dependability and performance assessment of dynamic connected systems.
Sagar Gulati,K Bhatia,P Yadav (2012). Reliability Optimization for Distributed Systems through Task Clustering.
A Micle (2014). A fault-injection methodology for the system-level dependability analysis of multiprocessor embedded systems.
S Distefano,A (2007). Dependability modeling and analysis in dynamic system.
T Ter Braak,S Burgess,H Hurskainen,H Kerkhoff,B Vermeulen,X Zhang (2010). On-line dependability enhancement of multiprocessor SoCs by resource management.
P Masci,M Martinucci,F Di Giandomenico (2011). Towards automated dependability analysis of dynamically connected systems.
M Bagheri,G Jervan (2014). Faulttolerant scheduling of mixed-critical application on multi-processor platforms.
S Venkataraman,R Santos,A Kumar,J Kuijsten (2015). Hardware task migration module for improved fault tolerance and predictability.

Download References

Funding

No external funding was declared for this work.

Conflict of Interest

The authors declare no conflict of interest.

Ethical Approval

No ethics committee approval was required for this article type.

Data Availability

Not applicable for this article.

How to Cite This Article

Pulicherla Radhika, Dr. Sudarson Jena. 2020. "Designing and Valuating System on Dependability Analysis of Cluster-Based Multiprocessor System". Global Journal of Computer Science and Technology - G: Interdisciplinary GJCST-G Volume 20 (GJCST Volume 20 Issue G3).

More Citation Formats

Select Citation Style:

Download Citation

GJCST Volume 20 Issue G3

Explore Journals Explore Volume Read This Issue

Journal Specifications

Crossref Journal DOI 10.17406/gjcst

Print ISSN 0975-4350

e-ISSN 0975-4172

Keywords

Not Found

Classification

GJCST-G Classification C.1.2

Submission ReceivedDecember 15, 2019
Peer Review Double Blind
Handling Editor
Accepted December 31, 2019
Published January 15, 2020

Version of record

v1.2

Issue date

April 27, 2020

Language

English

Experiance in AR

Explore published articles in an immersive Augmented Reality environment. Our platform converts research papers into interactive 3D books, allowing readers to view and interact with content using AR and VR compatible devices.

View in VR

Read in 3D

Your published article is automatically converted into a realistic 3D book. Flip through pages and read research papers in a more engaging and interactive format.

View in 3D

Article Matrices

Total Views: 1.8K

Total Downloads: 73

All Trends