Effects of Ageing on Mechanical Behaviour of Homogenized Twin Rolled 8011 Type Al-Fe-Si Alloy

Effects of Ageing on Mechanical Behaviour of Homogenized Twin Rolled 8011 Type Al-Fe-Si Alloy

A. O. Ogunsanya

Contact

P. S. Olayiwola

Contact

D. O. Daramola

Contact

Effects of Ageing on Mechanical Behaviour of Homogenized Twin Rolled 8011 Type Al-Fe-Si Alloy

Article Fingerprint

ReserarchID

MU8WI

Effects of Ageing on Mechanical Behaviour of Homogenized Twin Rolled 8011 Type Al-Fe-Si Alloy Banner

AI TAKEAWAY

Connecting with the Eternal Ground

Abstract

The use of aluminium-iron alloy sheet is of great importance depending on service requirements for specific application as these materials provide a light weight alternative to steel sheet grades but have limitations in the area of mechanical strength. Exploring ways of improving its mechanical properties particularly its strength has led to development of strength-induce forming processes. In this paper, the effect of ageing on the mechanical properties and morphological structure of homogenized twin rolled 0.85% Fe Al alloy 8011 for potential use in orthopaedic devices was investigated. Mechanical properties of homogenized, cold rolled, hot rolled prior to ageing at 175 0C of twin rolled Al-Fe-Si alloy was characterized.

References

40 Cites in Article

Reference Format

Willian Callister (2006). Fundamentals of materials Science and Engineering.
Oluwasegun Owolabi,Lawrence Osoba,Samson Adeosun (2011). THERMAL AND COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF AN OIL FIRED CRUCIBLE FURNACE DURING SECONDARY ALUMINUM SMELTING.
J Deangelis,B Browner,A Caputo,J Mast,M Mendes (2008). Skeletal Trauma.
R Radha,D Sreekanth (2017). Insight of magnesium alloys and composites for orthopedic implant applications – a review.
Frank Witte,Inken Abeln,Elinor Switzer,Volker Kaese,Andrea Meyer‐lindenberg,Henning Windhagen (2008). Evaluation of the skin sensitizing potential of biodegradable magnesium alloys.
D Williams (2006). New interests in magnesium.
Nicholas Kirkland,Ingolfur Kolbeinsson,Tim Woodfield,George Dias,Mark Staiger (2009). PROCESSING-PROPERTY RELATIONSHIPS OF AS-CAST MAGNESIUM FOAMS WITH CONTROLLABLE ARCHITECTURE.
N Kirkland,I Kolbeinsson,T Woodfield,G Dias,M Staiger (2011). Synthesis and properties of topologically ordered porous magnesium.
Yeoheung Yun,Zhongyun Dong,Dianer Yang,Mark Schulz,Vesselin Shanov,Sergey Yarmolenko,Zhigang Xu,Prashant Kumta,Charles Sfeir (2009). Biodegradable Mg corrosion and osteoblast cell culture studies.
Haydée López,Dora Cortés-Hernández,Sergio Escobedo,D Mantovani (2006). In Vitro Bioactivity Assessment of Metallic Magnesium.
A Rafiq,Hussein Siddiqui,Abdullah,R Khamis,Al-Belushi (2000). Inference of aging parameters on the mechanical properties of 6063 aluminum alloy.
Aalco (2010). Aluminium alloy: Introduction to Aluminium and its alloys.
R Sanders,S Baumann,H Stumpf (2004). Wrought Non–Heat-Treatable Aluminum Alloys.
Alumatter Aluminium (2010). Materials science and Engineering.
H Bessember (1865). James Henderson's Improvement in the Manufacture of Iron and Steel.
R Cook,P Growcock,P Thomas,D Edmonds,J Hunt (1995). Development of Twin Roll Casting Process.
Martin Lentz,Galyna Laptyeva,Olaf Engler (2016). Characterization of second-phase particles in two aluminium foil alloys.
B Yücel (2008). Response to annealing treatments of twinroll cast thin Al-Fe-Si strips.
A Ghosh (2001). Segregation in cast products.
Ozgul Keles,Murat Dundar (2007). Aluminum foil: Its typical quality problems and their causes.
Ch,M Gras,J Meredith,Hunt (2005). Micro-defects formation during the twin-roll casting of Al-Mg-Mn aluminum alloys.
Ranjeet Kumar,Aman Gupta,Amit Kumar,R Chouhan,Rajesh Khatirkar (2018). Microstructure and texture development during deformation and recrystallisation in strip cast AA8011 aluminum alloy.
H Westengen,K Nes (1984). Twin Roll Casting of Aluminium: The Occurrence of Structure Inhomogeneities and Defects in As Cast Strip.
Aziz Dursun,Beril Çorlu,Canan İnel,S Aktuğ,Murat Dündar Effect of Treatment on Microstructural Evolution of 1050 and 1200 TRC Aluminum Alloys.
Z Xing,S Kang,H Kim (2001). Softening behavior of 8011 alloy produced by accumulative roll bonding process.
O Yakubu,I Usman,A Aliyu,O Emmanuel (2016). INFLUENCE OF IRON CONTENT AND PLASTIC DEFORMATION ON THE MECHANICAL PROPERTIES OF 8011-TYPE Al-Fe-Si ALLOY.
H Zhang (2007). Effect of Iron on the Microstructure and Mechanical Properties of Al-Si Alloys.
A John (2009). The Effect of Iron in Al-Si Casting Alloy.
T Mbuya,B Odera,S Nganga (2003). Influence of Iron on Castability and Properties of Aluminium Silicon Alloys.
W Miller,J Zhuang,A Bottema,P Witterbrood,P Smet,A Haszler,A Vieregge (2000). Recent Development in Aluminium Alloys for the Automotive Industry.
N Manivannan,W Balachandran,R Beleca,M Abbod (2011). Microwave Plasma System Design and Modelling for Marine Diesel Exhaust Gas Abatement of NOx and SOx.
L Lu,A Dahle (2005). Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys.
S Shabestari,M Mohammed,M Emamy,J Campbell (2002). Effect of Mn and Sr on Intermetallics in Fe-rich Eutectic Al-Si Alloys.
A John (2009). The Effect of Iron in Al-Si Casting Alloy.
M Tajally,Z Huda,H Masjuki (2009). Effect of Cold Rolling on Bending and Tensile Behavior of 7075 Aluminum Alloy.
S Hassan,P Ebrahim (2011). Effect of hot cumulative roll bonding on the mechanical properties of AA 5058.
O Yakubu,I Usman,A Aliyu,O Emmanuel (2016). INFLUENCE OF IRON CONTENT AND PLASTIC DEFORMATION ON THE MECHANICAL PROPERTIES OF 8011-TYPE Al-Fe-Si ALLOY.
S Salem (2007). The Influence of Iron on the Microstructure and Mechanical Properties of Cast Al-Si Alloys.
G Akshap,M Ibrahim (2008). Mechanical Properties of Zn-9%-3%Cu Alloy after Equal Channel Angular Extrusion.
Joon-Yeon Chang,Aidang Shan (2003). Microstructure and mechanical properties of AlMgSi alloys after equal channel angular pressing at room temperature.

Download References

Funding

No external funding was declared for this work.

Conflict of Interest

The authors declare no conflict of interest.

Ethical Approval

No ethics committee approval was required for this article type.

Data Availability

Not applicable for this article.

How to Cite This Article

A. O. Ogunsanya. 2019. \u201cEffects of Ageing on Mechanical Behaviour of Homogenized Twin Rolled 8011 Type Al-Fe-Si Alloy\u201d. Global Journal of Research in Engineering - A : Mechanical & Mechanics GJRE-A Volume 19 (GJRE Volume 19 Issue A4): .

More Citation Formats

Select Citation Style:

Download Citation

Download Article

GJRE Volume 19 Issue A4
Pg. 13- 24

Explore Journals Explore Volume Read This Issue

Journal Specifications

Crossref Journal DOI 10.17406/gjre

Print ISSN 0975-5861

e-ISSN 2249-4596

Keywords

Not Found

Classification

GJRE-A Classification: FOR Code: 090399

Submission ReceivedDecember 10, 2018
Peer Review Double Blind
Handling Editor
Accepted January 2, 2019
Published January 15, 2019

Version of record

v1.2

Issue date

November 13, 2019

Language

Experiance in AR

Explore published articles in an immersive Augmented Reality environment. Our platform converts research papers into interactive 3D books, allowing readers to view and interact with content using AR and VR compatible devices.

View in VR

Read in 3D

Your published article is automatically converted into a realistic 3D book. Flip through pages and read research papers in a more engaging and interactive format.

View in 3D

Article Matrices

Total Views: 2782

Total Downloads: 1254

2026 Trends

Published Article

Our website is actively being updated, and changes may occur frequently. Please clear your browser cache if needed. For feedback or error reporting, please email [email protected]