Review of Accomplishments in Abrasive Waterjet from Macro to Micro Machining – Part 1

Review of Accomplishments in Abrasive Waterjet from Macro to Micro Machining – Part 1

h.t._peter_liu

Contact

H.T. Peter Liu

Contact

Review of Accomplishments in Abrasive Waterjet from Macro to Micro Machining – Part 1

Article Fingerprint

ReserarchID

O8N4G

Review of Accomplishments in Abrasive Waterjet from Macro to Micro Machining – Part 1 Banner

AI TAKEAWAY

Connecting with the Eternal Ground

Abstract

Abrasive-waterjet (AWJ) technology possesses inherent characteristics unmatched by most machine tools. The initial commercialization of AWJ in the mid1980s was to take advantage of its superior cutting power for raw cutting of thick and difficult-to-machine materials. Subsequenlty, considerable R&D was devoted to take full advantage of the above characteristics while refining machining processes toward precision machining and automation. This two-part paper presents the accomplishments that advance AWJ technology in terms of improving the cutting accuracy and efficiency, broadening applications for machining delicate materials from macro to micro scales, and enabling 3D capability for multimode machining. In Part 1 of the paper, six topical areas are presented to demonstrate some of the important achievements in advancing AWJ technology. The areas include: -control software, meso-micro and stack machining, macro to micro machining, cold cutting, hole drilling, and gear making. Additional topical areas will be presented in Part 2 of the paper to fully explore the technological and manufacturing merits of AWJ technology. Such merits had elevated AWJ technology as one of the most versatile machine tools competing on equal footing, and with advantage in some cases, among subtractive and additive manufacturing tools. The accomplishments presented in this paper had clearly demonstrated that AWJ technology was capable of multi-mode machining for most materials from macro to micro scales, the “7M” advantage. The versatility of AWJ technology has clearly demonstrated its “7M” advantage.

References

31 Cites in Article

Reference Format

G Bachelor (1967). An Introduction to Fluid Dynamics.
Charlotte Boyer,Genesis (2018). Re-evaluating Optimal Vaccine Schedules Against Ebola (REVOLVE).
Axel Henning,Michael Lo,Ernst Schubert,Peter Miles (2016). Effect of Particle Fragmentation on Cutting Performance in Abrasive Waterjets.
M Jerman,H Orbanic,I Etxeberria,A Suarez,M Junkar,A Lebar (2011). Measuring the Water Temperature Changes throughout the Abrasive Waterjet Cutting System.
H.-T Liu (2006). Collateral Damage by Stagnation Pressure Buildup during Abrasive-Fluidjet Piercing.
H.-T Liu (2006). Hole Drilling with Abrasive Fluidjets.
H.-T Liu (2006). Empirical Modeling of Hole Drilling with Abrasive Waterjets.
( Liu,) H.-T Peter (2015). Novel Processes for Improving Precision of Abrasive Waterjet Machining.
Null- Liu,P Miles,A Henning (2016). Roles of Taper Compensation in AWJ Ultra-Precision Machining.
H.-T Liu (2017). 7M"Advantage of Abrasive Waterjet for Machining Advanced Materials.
H.-T Liu (2017). Versatile Micro Abrasive Waterjet Technology for Machining Nanomaterials.
H.-T Liu (2017). Precision machining of advanced materials with abrasive waterjets.
H.-T Liu,Peter (2019). Performance Comparison of Meso-Micro Machining of Waterjet, Lasers, EDM, and CNC Milling.
H.-T Liu,Peter (2019). Advanced Waterjet Technology for Machining Curved and Layered Structures.
H-T Liu,E Schubert (2009). Piercing in delicate materials with abrasive-waterjets.
H.-T Liu,D Mcniel (2010). Review of Accomplishments in Abrasive-Waterjet Technology from Macro to Micro Machining: Part 2.
H-T Liu,E Schubert (2012). Micro Abrasive-Waterjet Technology.
(peter) Liu,Neil Gershenfeld (2020). Performance Comparison of Subtractive and Additive Machine Tools for Meso-Micro Machining.
H.-T Liu,P Miles,S Veenhuizen (1998). CFD and Physical Modeling of UHP AWJ Drilling.
( Liu,) H.-T Peter,V Cutler,N Webers (2018). Recent Advancement in Abrasive Waterjet for Precision Multimode Machining.
( Liu,) H.-T Peter,V Cutler,C Raghavan,P Miles,N Webers (2018). Advanced Abrasive Waterjet for Precision Multimode Machining.
( Liu,) H.-T Peter (2015). Novel Processes for Improving Precision of Abrasive Waterjet Machining.
Gokhan Aydin,Izzet Karakurt (2022). Abrasive Water Jet Machining (AWJM).
D Miller (2003). Micromachining with abrasive waterjets.
D Miller (2005). New Abrasive Waterjet Systems to Complete with Lasers.
K Tate (2013). How to Catch an Asteroid: NASA Mission Explained (Infographic).
I Wright (2016). An Engineer's Guide to Waterjet Cutting.
Guiling Xu,Ping Lu,Menghui Li,Cai Liang,Pan Xu,Daoyin Liu,Xiaoping Chen (2018). Investigation on characterization of powder flowability using different testing methods.
G Yadav,B Singh (2016). A Comprehensive Review in the Field of Abrasive Water-jet Machining.
J Zeng (2007). Determination of machinability and abrasive cutting properties in AWJ cutting.
J Zeng,T Kim,R Wallace (1992). Improvement of the machining accuracy of body components.

Download References

Funding

No external funding was declared for this work.

Conflict of Interest

The authors declare no conflict of interest.

Ethical Approval

No ethics committee approval was required for this article type.

Data Availability

Not applicable for this article.

How to Cite This Article

h.t._peter_liu. 2020. \u201cReview of Accomplishments in Abrasive Waterjet from Macro to Micro Machining – Part 1\u201d. Global Journal of Research in Engineering - A : Mechanical & Mechanics GJRE-A Volume 20 (GJRE Volume 20 Issue A1).

More Citation Formats

Select Citation Style:

Download Citation

GJRE Volume 20 Issue A1

Explore Journals Explore Volume Read This Issue

Journal Specifications

Crossref Journal DOI 10.17406/gjre

Print ISSN 0975-5861

e-ISSN 2249-4596

Keywords

Not Found

Classification

GJRE-A Classification FOR Code: 290501p

Submission ReceivedDecember 16, 2019
Peer Review Double Blind
Handling Editor
Accepted December 31, 2019
Published January 15, 2020

Version of record

v1.2

Issue date

July 10, 2020

Language

Experiance in AR

Explore published articles in an immersive Augmented Reality environment. Our platform converts research papers into interactive 3D books, allowing readers to view and interact with content using AR and VR compatible devices.

View in VR

Read in 3D

Your published article is automatically converted into a realistic 3D book. Flip through pages and read research papers in a more engaging and interactive format.

View in 3D

Article Matrices

Total Views: 2462

Total Downloads: 1194

2026 Trends

Our website is actively being updated, and changes may occur frequently. Please clear your browser cache if needed. For feedback or error reporting, please email [email protected]