Making WorldThe question of whether computers can think is just like the question of whether submarines can swim. ~Edsger W. Dijkstra Read More

    Designing the bestIf a man happens to find himself, he has a mansion which he can inhabit with dignity all the days of his life.~ James A. Michener Read More

    Developing World AccessScientists dream about doing great things. Engineers do them.
    ~James A. Michener
    Read More
  • 1
  • 2
  • 3

Introduction & Purpose
Section B, Automotive Engineering of Global Journals of Research in Engineering welcomes original research papers and articles on traditional and emerging domains of engineering. It is a double-blind, peer reviewed, international journal encouraging studies in fields but not limited to mechanical and automotive engineering, aerospace, robotics, civil engineering and chemical science. 


Objective of Journal
Foundation of modern society and human race relies greatly on engineering and its applications. This journal aims to bridge the gap between different aspects of the industry and engineering concepts. Engineering being a vast field, the journal publishes interdisciplinary collaboration between fields. Special editions of this journal may contain observational studies, whitepapers, reports, accepted industry standards and thesis.  


The peer review workflow and process is rigorous and double-blind following recognized standards.
Workflow Guide

Submit in any format

You can send articles in any format. Our expert executives will perform formatting tasks.
Author Guidelines (optional)

Print Journal

The multi-colored print journal is impressed on 110 GSM paper and matt-laminated photo paper binding. After e-journal launch using an innovative and eco-friendly production process, a complimentary copy is dispatched to authors within ten days.


3D virtual journal, e-journal, PDF, PS, HTML, and PKP Open Journal System’s XML formats are available for each article.


Global Journals Incorporated is Delaware, USA-based and a well-established international organization which is governed by ISO-certified groups and accredited by non-profit societies. For more than a decade, thousands of universities and authors from 153 countries have acknowledged and published with us.
View Specifications

Commitment to Excellence

Our inviolable and mandatory practice of thorough peer review at the heart of our scholarly publishing is to ensure that only good science is published in our refereed journal.

Indexing and Impact

The journal is indexed/being indexed by almost all relevant indexing organizations with world-class standards for journal assessment to match the requirements of top universities and institutions.
View Specifications

Global Journal of Research in Engineering

Since 2001, Global Journal of Research in Engineering (GJRE): (B) Automotive Engineering, has been an academic open access, peer-reviewed, interdisciplinary, refereed journal focusing on all aspects of Engineering Research published by Global Journals, which is one of the fastest growing and leading Research Journal publishing organization in the world. The GJRE is superintended and sponsored by Non Profit making Open Association of Research Society USA (OARS). The OARS has been esteemed internationally since 1964, aiming to highlight the research of frontiers and enhance research & development.


  • Publish Video with us

    Publish Video with us

    If a picture is worth a thousand words, then a video is worth a million. Broadcast your research in video format for free.

    Learn more & submit your Video

  • Organize a Conference with us

    Organize a Conference with us

    Let’s do big. Organize, collaborate with, and sponsor upcoming seminars, symposiums, conferences, and webinars.

    Contact Evangelist

  • Access Scientific Community Infrastructure

    Access Scientific Community Infrastructure

    • Use our standards of cloud infrastructure to carry out research.
    • Get access to research project's relevant sponsors.
    • Automated tools allow us to collaborate and validate your manuscript and references on the cloud during theauthoring process.

    Submit your project

  • Knowledge Reservoir of Theses and e-Books

    Knowledge Reservoir of Theses and e-Books

    Publish your e-book or thesis/dissertation with us. Our open-access e-books publishing service allows authors to edittheir manuscripts in collaboration with us.

    Submit your Thesis Submit your Ebook

  • Subscribe to Journals

    Subscribe to Journals

    E-Journal, library IP, and mobile access and an institutionally branded dashboard are available.

    Download Brochure Subscribe Journal

  • 1

Best Practices

Type of License Creative Commons
Open Access Yes
Does the author retain unrestricted copyright? Yes
Does the author retain publishing rights? Yes
Permanent article identifier DOI (Digital Object Identifier)

Read Standards

Latest eJournals GJRE

GJRE-C Volume 18 Issue 1
GJRE-J Volume 18 Issue 3

Journal Specification

GJRE-B Volume 18


ISSN Online 2249-4596
ISSN Print 0975-5861
Print Estd. 2001
DOI 10.17406/gjre
Publishing Frequency Monthly
Society Accreditation Yes

Journal Metrics

Recent Citations

Citation indices  All Since 2011
Citations 1684 1637
h-index 15 15
i10-index 38 34


Submit Paper to GJRE

Researchers and scientists can now submit papers with ease using our special “Submit Paper” service. If you are experiencing some problem submitting your material, you can go through this link and submit a paper in a simplified manner.

Click here to “Submit” your paper


Engineering Membership (optional)

Global Journals Inc., as described in our Corporate Statement, is an educational, research, research publishing, and professional membership organization. Elevation to the ranks of Fellow of the Association of the Research Society in Engineering and Member of the Association of the Research Society in Engineering is open.

  Click here for more details.

Engineering Innovations Blog



Global Journals eBooks

and Thesis

Publication Service


Recent Articles Published in GJRE-B

Investigations on the Potential of Miller Cycle for Performance Improvement of Gas Engine

To further improve thermal efficiency, Miller Cycle was applied to a turbo-charged 338 kW gas engine. Different methods of Miller Cycle were analyzed, including three Early Intake- Valve Closing (EIVC) methods and three Late Intake-Valve Closing (LIVC) methods. After the relatively suitable methods were chosen, the combination of the Miller Cycle a...

Read Paper

Study on Simulation of on-Center Handling Tests

This paper describes a simulation of on-center handling test, in which a linear 3 degrees of freedom vehicle handling model and a power integral steering system model are incorporated to calculate the time histories of steering wheel angle, steering wheel torque, and vehicle lateral acceleration. The cross plots of steering wheel angle-lateral acce...

Read Paper

A Comparative Study of Cost Estimation Models used For Preliminary Aircraft Design

Estimation of the direct operating cost (DOC), seat mile cost (SMC) and price of the aircraft, is an important aspect in commercial transport aircraft design. The operating costs are classified into two categories which are direct operating cost (DOC) and indirect operating cost (IOC). IOC is difficult to estimate well, since it depends on the serv...

Read Paper

Viscoelastic Parameter Identification based Structure-Thermal Analysis of Rubber Bushing

Rubber bushing, working as flexible connection parts or vibration isolators, is widely used in commercial vehicles, airplane, and off-highway transportation. The appropriate mathematical modeling of it in proper vehicle simulation is becoming more and more demanding recently. This paper focuses on viscoelastic parameter identification based structu...

Read Paper

A DoE Method in Predicting Injuries to Out-of-Position Occupants from Torso-Only Side-Impact Airbags

Airbag systems such as frontal and side-impact airbags are developed to reduce occupant injuries during vehicle collisions. Yet, such systems have caused serious injuries to out-of-position occupants especially to smaller females and children. The primary objective of this study is to examine the different influential factors such asmass flow rate,...

Read Paper

Articles under Review

Understanding Apparel Preference of Different Social Status People of Bangladesh Apparel Market

The work reported in this paper is based on much Bangladeshi local apparel preference in different social status people. The Apparel Industry reflects people’s lifestyles and shows their social and economic status. Therefore, different social status people of Bangladesh apparel preferences are important to research because it is an important sect...

Supplier Selection using Integer Linear Programming Model

Contemporary business organizations highly depend on outsourcing for success in today’s competitive marketplace, and selecting a suitable supplier is an important process as developing new products. Supplier selection is one of the most important decisions of supply chain management which is upstream management. As organizations become more depen...


The use of onboard sound card features of general purpose multimedia PC to generate tone bursts 1750, 2000 and 2250 Hz signals for tri-axial monostatic Doppler sodar system along with the timing signals for both transmission and reception. In this paper we describe the use of Data acquisition tool box (DAT) and Signal processing tool box (DSP) in ...

Experimental and numerical studies on the behavior of cylindrical and conical shells with varying thickness along the length sujected to axial compres

The behavior of aluminum cylindrical and conical shells of thickness variation along their lengths subjected to quasi-static axial compression was examined. The study was conducted using experimental and FE simulation approaches. The cylinders had mean radius of 25 mm, while the cones had smaller and larger radii of 15 mm and 35 mm respectively. Th...


This paper presents teletraffic modeling of Code Division Multiple Access (CDMA) systems that enabled the analysis of such systems capacity. Analytical tools aided by software model that assisted in analysis of the system performance, capacity estimation, dimensioning and design of CDMA networks were achieved. This work, therefore, focused on model...

Articles under Press


Automatic Street Light Control System using Light Dependent Resistor and Motion Sensor

Automatic street light control system aims at designing and executing the advanced development in embedded systems for energy saving of street lights by using Light Dependent Resistor (LDR).Nowadays, human has become too busy and he/she is unable to find time even to switch the lights on or off. This new system can be used more effectively in case ...

Energodynamic Theory of the Shawyer’s Engine

It is shown that the accusations of violation of the law of conservation of pulse by the Shoyer’s engine are untenable and are due to the neglect of the existence of non-baryonic matter (the "hidden mass"), in relation to which this installation is not a closed system. An energodynamic theory is proposed according to which the appearance of thrus...

Can Broken Multicore Hardware be Mended?

The multi- and many-core (MC) era we have reached was triggered after the beginning of the century by the stalling of single-processor performance. Technology allowed more transistors to be placed on a die, but they could not reasonably be utilized to increase single-processor performance. Predictions about the number of cores has only partly been ...

Experimental Characterization of Milling, Compaction and Sintering of Nanocrystalline FC-0205 Copper Steel Powder

The effect of ball milling on the compaction and sintering of nanocrystalline copper steel powder (FC-0205) was evaluated within this work. The as- received micron-sized FC-0205 copper steel powder were subjected to High Energy Ball Milling (HEBM) in an argon atmosphere at different milling times of 0, 16, 20 and 24 hours to obtain nanocrystalline ...

Community Groups Computer Science

  • 1

Connect on Facebook

JFBConnect not found. Please reinstall.

Indexing Logos
USA Incorporation No.: 0423089 | OARS Affiliation Id: 4636/AO | USA Tax ID (Emp. ID): 098-0673227 | License No.: 42125/022010/1186 | Reg. No.: 430374 | Import-Export: 1109007027
As ISO 9001:2005 Certified Group. Global Journals Logo® is a registered trademark of Global Journals Incorporated and Global Journals Private Limited. Corporate Research Patents Pending. Copyrights © 2016 by Global Journals Creative Commons License Creative Commons License Open Access Journals by Global Journals is licensed under a Creative Commons Attribution 4.0 International License.