In This paper, we studied of the landslide occurred in the northern of Iran in the southern Sari in the road of Kiasar using a physically based model has been named SHALSTAB andlandslide instability mapping of study area is determined. The Aim of This paper is to determine the Effectiveness of road construction in the landslide occurred. The model runs to base on geotechnical data extracted from laboratory testing on the 15 landslide points. A landslide inventory map along the road Kiasar, including 63 landslide points was prepared for study area. The results of field investigations, analyzing geological data, laboratory tests and running model indicated that 88% of landslides are in the unstable region which represents a successful prediction of running model in this area and also according to this model, 25/9 percent of the areas were located as stable. The results established that the SHALSTAB model is also a valuable model for prediction of landslide prone zone for the occurrence of shallow landslides in study area.

Activity based costing (ABC) is a method for determining true costs; which has become an important aspect of manufacturing/service organizations and can be defined as a methodology that measures the cost and performance of activities, resources and cost objects. It can be considered as an alternative method to traditional cost accounting systems. In this paper we have shown a comparative analysis of application of ABC method with traditional cost accounting (TCA) method in an automobile parts manufacturing company; which would like to increase the sales due to increased demand. For this reason the company needs to know the true cost of the parts prior to deciding as which item is to be produced more. In this case study the results are obtained between the two cost accounting methods by comparing TCA margin % and ABC margin % and these results are used to identify the low-priced and over-priced parts of the company.

This paper deals with the implementation of a new low cost five level inverter which converts the 9V DC to 9V AC. Complexity and cost of the system are reduced as compared to other configurations by using only five switches, eight diodes and two capacitors. In the proposed scheme, control circuit is designed using 89C51 microcontroller to produce sinusoidal pulse width modulation(SPWM).The developed system can be operated at very high modulation frequencies of upto 200 KHz producing sustained output. This single-phase five level low cost inverter is developed and tested in power electronics laboratory. The waveforms are recorded and analyzed using Digital Storage Oscilloscope TDS2024B. The proposed scheme is very economic and less complex and the experimental results shows that it has low total harmonic distortion.

In this chapter, we study the natural convection heat transfer in a saturated porous medium confined in a vertical annular porous medium. In this study Finite Element Method (FEM) has been used to solve governing partial differential equations. Results are presented interms of average Nusselt number (Nu), streamlines and Isothermal lines for various values of Rayleigh number (Ra), Cone angle (CA) and Radius ratio (Rr).

Requirement engineering (RE) concerns goal identification by a system, operationalization of such goals into services and constraints, and assigning responsibilities, needs to agents including humans, devices/software. RE processes include negotiation, documentation, domain analysis, specification, elicitation, assessment, and evolution. It is difficult and critical to get high quality requirements. The paper gives a synopsis of the field of requirements engineering. RE is defined, and a brief history of main concepts and techniques is presented. The result got by using the method is very promising. It was evaluated extensively on Non Functional Requirements (NFR) dataset obtained from PROMISE repository, which is publicly accessible.

Chromatographic System Chromatography was performed with a high performance liquid chromatography. The HPLC system was consisted of Shimadzu SCL-10A system controller, UV visible SPD-10AV detector and LC-10AT pump with FUC-10AL VP flow controller wall. Separation was achieved at ambient temperature with Hypersil C18 BDS 250x4.6 column pore size of 5 micron. Chromatographic data was collected and analyzed using CSW32 software. Chromatographic conditions Quantitative analysis of allopurinol was achieved by using an isocratic mode. UV detector was use for the detection of allopurinol. Hypercil C18 BDS 250*4.6 column was used. Flow rate was maintain at 1ml/min with 20 min run time. Preparation of mobile phase The mobile phase was prepared by dissolving 2.72 g NaCH3COO·3H2O in 3000mL distilled water and correcting the pH to 4.5 with acetic acid 30%. The mobile phase was filtered and degassed before use. The mobile phase was filtered in vacuum filtration assembly having cellulose filter which have pore size 0. 45um (Sartorius company ). Filterd mobile phase was solicited for the removal of bubbles for 10 minutes. (eyela sonicator )improve the community knowledge, attitude and practice towards malaria prevention and control options.

In contrast to recent general conceptions of technical secondary schools in Ontario, the Windsor Walkerville Technical School, later named W.D. Lowe Technical School, was wholeheartedly supported by its community. The school began with a vision of offering education that was appealing to those boys who were deemed likely to end up in “gangs of hooligans.” The rough and tough reputation of the WWTS/WDLTS would attest to the needs that founder F.P. Gavin saw in the community, but the school quickly gained a reputation for turning out the “captains and generals” of the industrial army in the form of skilled and successful machinists, tool and die makers and mould makers who built specialized parts for the automotive industry. The school existed historically in a social and economic context with the ingredients for a technical secondary school that served working class male youth well. Today those ingredients no longer exist.

Bangladesh is a promising developing country in the world. Key exportable side of Bangladesh is Ready Made Garment (RMG) sector. It has great impact on the development of the Bangladesh. It is a matter of great interest that RMG sector is healthy and handsome due to the contribution of Bangladeshi women from the beginning of the garment industry. Here we have concentrate to predict the women contribution at any time in future. We have collected the data set from Bangladesh Academic of Science and National Academic of Science India. We used K-Nearest Neighbor (K-NN) Algorithm for selecting the desired data set. Besides this KNN, Two clustering methods as K-Medoids and K-means algorithm are used. The Baysian Network (BN) helps to accomplish the proper predictions along with Markov Chain (MC). Finally we have prepared two lists of next promising country of the RMG field and the contribution of women in future development of Bangladesh.

The AJAX has changed the traditional paradigm of Web development by giving partial page update facility. The facility to update the Web pages partially can be very advantageous to improve usability of online information systems. The research paper discusses some instances when usability of online information systems can be improved using AJAX.

The statement about the property of some definite thing is not usually the only one. The difference between the stated property and the property of such a definite thing is one type of information rheology. Its origin is that the interaction of a definite thing with other things is incomplete. Based on the definition of customarily-called information and its mathematical expression, this paper points out that information rheology certainly exists. It gives us a caution that information is not necessarily conclusive, and not likely to correspond to definite things. Information is not the criterion, but practice is the sole one for testing truth. It is certain that to study customarily-named information by bringing it to the height of ontology is not promising. Also, the attempt to justify information is hard to be realized