G: Industrial Engineering (73)
GJRE: G
Superalloys: An Introduction with Thermal Analysis
Published In: GJRE Part: G: Industrial Engineering Volume: 15 Issue: 2
Nickel based superalloys are commonly used materials in the aero industry and more specifically in the hot section of aero engines. These nickel and nickel iron based superalloys are precipitation strengthened alloys with a face centered cubic gamma matrix. Alloy 718, Allvac 718Plus and Waspaloy have been of great interest in the present study. Alloy 718 is a precipitation strengthened n...
Paper Information
Authors Syed Shehzad RazaRead Journal Click Here
Read Paper Click Here
Page No. 1 to 6
An Analysis of Industrial Relations Practice in Nigeriaa Ghana (Similarities and Differences in their Systems)
Published In: GJRE Part: G: Industrial Engineering Volume: 15 Issue: 1
This research work compare and contrast industrial relations practice in two West African countries paying a particular attention to Ghana and Nigeria, showing the area of difference and similarities between the two nations. ...
Paper Information
Authors Adeniji, Moses AdenugaRead Journal Click Here
Read Paper Click Here
Page No. 41 to 46
A Literature Survey on TCP-Test Case Prioritization using the RT-Regression Techniques
Published In: GJRE Part: G: Industrial Engineering Volume: 15 Issue: 1
This paper focusses on the regression testing (R/T) for the test case prioritization (TCP). An attempt had been put up over here to explore the investigations carried out, conclusions obtained and the future works planned for almost ninety research papers and to decide upon a tentative title for the future research work as a plan of action. For this, various prioritization techniques, al...
Paper Information
Authors R.Surya Kiran ,Prof.(Dr.) Chandraprakash, Koneru SrinivasRead Journal Click Here
Read Paper Click Here
Page No. 29 to 40
Lean Wastes and its Consequences for Readymade Garments Manufacturing
Published In: GJRE Part: G: Industrial Engineering Volume: 15 Issue: 1
Waste is unnecessary for any kind of industry because it raises the manufacturing cost of products. For owners or clients waste is anything that cannot create any value. By effective lean production system it becomes possible to decline the generation of wastes and increase the productivity in any industries. So, it became very significant to identify lean wastes and its effects on produ...
Paper Information
Authors Sumon MazumderRead Journal Click Here
Read Paper Click Here
Page No. 15 to 19
Implementation of Alternative Solutions in Linear programming Modeling using the Dual Simplex Method and Duality Method from Primal Problem, Establishing Implementation through the Simplex Methodology.
Published In: GJRE Part: G: Industrial Engineering Volume: 15 Issue: 1
The Document Research shows one way to visualize Alternative Solutions for the Same Problem using Mathematical Programming Tools Different Solution original, the potentially what efficient search optimization, the idea of solution can be implemented in any Services Company or manufacturing that are in the maximization or minimization of resources, compliance prior restrictions and condit...
Paper Information
Authors Francisco Zaragoza Huerta, Rociu00c3u00b3 Guzmu00c3u00a1n Lu00c3u00b3pez De LaraRead Journal Click Here
Read Paper Click Here
Page No. 21 to 28
A Framework for Assessing the Effectiveness of Competitive Tendering Process for Public Works Procurement at Pre-Contract Stage in Chad Republic
Published In: GJRE Part: G: Industrial Engineering Volume: 15 Issue: 1
Effective implementation of competitive tendering has the potential for assuring transparency, accountability, fairness, justice and ethical standards in public works procurement. It promotes sound contract practices and growth of indigenous technology. Furthermore, it can reduce time and cost, promote competition, hamper corruption, and strengthen the public service system. Although, co...
Paper Information
Authors Sazoulang DouhRead Journal Click Here
Read Paper Click Here
Page No. 1 to 13
Superpave System versus Marshall Design Procedure for Asphalt Paving Mixtures (Comparative Study)
Published In: GJRE Part: G: Industrial Engineering Volume: 14 Issue: 5
Over 98% of paved highways in Jordan have a surface course where asphalt cement is used as the binder agent. The prevalence of these pavements is constructed with hot-mix asphalt concrete. Asphalt concrete is a mixture of binder and aggregate under specified volume parameters. Based on empirical evidence, the volume of air used in the mix design process is four percent. Under the perform...
Paper Information
Authors Bara Al-MistarehiRead Journal Click Here
Read Paper Click Here
Page No. 51 to 58
Implementation Pratique
Published In: GJRE Part: G: Industrial Engineering Volume: 14 Issue: 5
Le but de chaque commande synthétisée dans le domaine de la recherche est d’être implémentée sur des systèmes réels afin de résoudre les problèmes qu’ils présentent et de donner une amélioration pour ces systèmes. C’est àpartir de ce principe quÃ...
Paper Information
Authors Selatnia MouradRead Journal Click Here
Read Paper Click Here
Page No. 25 to 39
Integration of Reverse Logistics Network into an in- Plant Recycling Process: A Case Study of Steel Industry
Published In: GJRE Part: G: Industrial Engineering Volume: 14 Issue: 5
A case study of a Bangladeshi steel industry is reported that is dealing with some aspects of reverse logistics operation in their organization for instance Bangladesh steel re-rolling mill (BSRM), Chittagong. In this paper, a transportation model is proposed to reduce the extent of internal steel scrap transportation based on real transport network. To validate these model linear optimi...
Paper Information
Authors Syimun Hasan Mehidi, Nayan Chakrabarty,Avishek Barua, Tarapada BhowmickRead Journal Click Here
Read Paper Click Here
Page No. 1 to 10
Calculation of the Strength Reliabilityof Parts under Random Loading
Published In: GJRE Part: G: Industrial Engineering Volume: 14 Issue: 5
The most important characteristics of many engineering objects are their strength and reliability. To determine the probability of an object failure according to the strength criterion, it is necessary to know the laws of distribution of the actual and ultimate stresses. However the processing of actual data on the acting and ultimate stresses indicates that these data cannot be describe...
Paper Information
Authors V.N. Syzrantsev, K.V. Syzrantseva, L.A. ChernayaRead Journal Click Here
Read Paper Click Here
Page No. 11 to 17
More...
Productivity Improvement by Lean Manufacturing an Automobile Industry with the Help of Method Study
Published In: GJRE Part: G: Industrial Engineering Volume: 14 Issue: 4
In assembly line design, the problem of balancing has received most attention from past researchers, and a number of algorithms have been devised for the analysis of single, multi- and mixed-product assembly lines. In many cases, such algorithms seek a solution for the particular situation, which is under consideration and therefore have very little flexibility for generic application to...
Paper Information
Authors Jitendra Mandloi, Mr. Abhishek YadavRead Journal Click Here
Read Paper Click Here
Page No. 31 to 33
An Optimal Layout Design in an Apparel Industry by Appropriate Line Balancing: A case study
Published In: GJRE Part: G: Industrial Engineering Volume: 14 Issue: 5
The layout design problem is a strategic issue and has a significant impact on the efficiency of a manufacturing system. Much of the existing layout design literature that uses a surrogate function for flow distance or for simplified objectives may be entrapped into local optimum; and subsequently lead to a poor layout design. The present study explores the use of appropriate line balanc...
Paper Information
Authors Md. Mominul Islam, H.M. Mohiuddin, Syimun Hasan Mehidi, Nazmus SakibRead Journal Click Here
Read Paper Click Here
Page No. 41 to 49
Time-Dependent Learning Effect and Deterioration on Single Machine’s Scheduling
Published In: GJRE Part: G: Industrial Engineering Volume: 14 Issue: 4
Learning effect and deterioration do not always occur separately. If both of them are founded simultaneously, the actual processing time of the jobs will both increase and decrease at the same time. The actual processing time is defined by a function of the starting time and position of jobs in the sequence. In this paper, the effect of learning and deterioration is applied to single mac...
Paper Information
Authors Dian Ayu Nurul Ihsani, Sunarsih, Robertus HeriRead Journal Click Here
Read Paper Click Here
Page No. 25 to 29
Optimization of Supply Chain Network Perspective Environmental Impact Based on Fuzzy Mathematical Programming
Published In: GJRE Part: G: Industrial Engineering Volume: 14 Issue: 4
Supply chain management (SCM) is concerned with a complex business relations network that contains interrelationships between various entities, such as suppliers, manufacturers, distribution centers and customers. SCM integrates these entities and manages their interrelationships through the use of information technology to meet customer expectation effectively along the entire value cha...
Paper Information
Authors Subrata Talapatra, Md. ShakilRead Journal Click Here
Read Paper Click Here
Page No. 7 to 23
