F: Electrical & Electronic

F: Electrical & Electronic (302)

GJRE: F

In this paper: a new strategy of anti-islanding photovoltaic (PV) power plant has been introduced. A new islanding detection strategy depending on power line signaling and control by inverter and numerical relays proposed in the literature. By generating, detecting and comparing between signals on the distribution feeders from the substation to the down-stream Distributed Generation (DG)...
Paper Information
Authors Esam.Zaki, Dalal.Helmy, Fahmi.Bendari
Read Journal Click Here
Read Paper Click Here
Page No. 1 to 5

Kurtosis of a time signal has been a popular tool for detecting nongaussianity. Recently, kurtosis as a function frequency defined in spectral domain has been successfully used in the fault detection of induction motors, machine bearings. A link between the nongaussianity and nonstationaity has been established through Wold-Cramer’s decomposition of a nonstationary signa...
Paper Information
Authors Venkata Krishna Rao M
Read Journal Click Here
Read Paper Click Here
Page No. 49 to 61

Cloud- induced fading is occasional but one of the main impairments affecting free– space optics (FSO). In this paper, the bit error rate of intensity modulated FSO with direct detection (IM/DD) in single–input single–output (SISO) over Ray Leigh fading channels has been represented. It has been assumed that a single information-bearing ...
Paper Information
Authors Abu Jahid, Md. Mehedi Hasan
Read Journal Click Here
Read Paper Click Here
Page No. 43 to 48

Middle Marsyangdi Hydropower Plant (MMHPP) in Nepal, has been currently facing a severe problem with the existing Cooling Water System (CWS) due to excessive silt which is coming with the flowing water in the open loop of CWS. Due to this, the existing system has been experiencing unexpected unit breakdown as well as frequent maintenance that ultimately cause a severe impact on the power...
Paper Information
Authors Shiv Kumar Shah, Dr. Rajendra Shrestha
Read Journal Click Here
Read Paper Click Here
Page No. 9 to 15

In this paper, a rectangular microstrip antenna loaded with two log periodic stubs is proposed. The antenna geometry is fed with a microstrip line which is tapered at the connection point. The proposed geometry is designed on easily available FR4_epoxy dielectric material and the dimensions of the dielectric substrate used are of 48 mm x 36 mm x 1.6 mm. Antenna geometry’...
Paper Information
Authors Shripad S. Pingle, Veeresh G. Kasabegoudar
Read Journal Click Here
Read Paper Click Here
Page No. 1 to 8

This paper represents design and development of a low cost solar automatic vehicle with two innovative approach. In both approaches, the solar automatic vehicle will be able to move on the roadturn to leftor right and stop at any obstruction on the road automatically. The automation is done by using three photosensors in the first approach and by using photosensorsand a microcontroller (...
Paper Information
Authors Rony Sorkar, Zubaear Alam, Galib Hashmi
Read Journal Click Here
Read Paper Click Here
Page No. 33 to 41

Digital signal processing techniques have gained steadily in importance over the past few years in many areas of science and engineering and have transformed the character of instrumentation used in laboratory and plant. This is particularly marked in acoustics, which has both benefited from the developments in signal processing and provided significant stimulus for these developments. A...
Paper Information
Authors Anshoo Sarswat, Hitendra Singh, Rahul Agarwal
Read Journal Click Here
Read Paper Click Here
Page No. 21 to 28

Surface mining operations use large tracked shovels to achieve economic bulk production capacities. Shovel reliability, maintainability, availability and efficiency depend on the service life of the crawlers. In rugged and challenging terrains, the extent of crawler wear, tear, cracks and fatigue failure can be extensive resulting in prolonged downtimes with severe economic implications....
Paper Information
Authors Samuel Frimpong, Magesh Thiruvengadam
Read Journal Click Here
Read Paper Click Here
Page No. 29 to 49

Some invariable situations where component to be joined even though machining is not advisable for composites. But special situations here present work aimed at identifying better machining process parameters to arrive at defect free machined surfaces. In general laminated composite materials are machined at very high speed to generate a defect free machined surface. The precise measurem...
Paper Information
Authors I.S.N.V.R.Prasanth, Dr. D.V. Ravishankar, Dr. Manzoor Hussain
Read Journal Click Here
Read Paper Click Here
Page No. 7 to 12

This paper reviews on the current trends, problems and prospects of image classification including the factors affecting it. By the end of the session we will be summarizing the popular advanced classification approaches and methods that are used to improve classification accuracy. The main motive of this review is to suggest a suitable image processing procedure in order to have a succe...
Paper Information
Authors Mr. S.V.S.Prasad, Dr. T. Satya Savithri, Dr. Iyyanki V. Murali Krishna
Read Journal Click Here
Read Paper Click Here
Page No. 17 to 32