F: Electrical & Electronic

F: Electrical & Electronic (302)

GJRE: F

In This paper wind, solar and fuel cells based stand alone cogeneration systems are presented for remote area utilities applications. This type of co generation system output voltages are not constant or stable in always. The generated output voltages are directly connected to the loads, without battery bank or energy storage devices. The PI, fuzzy control method was proposed in this pap...
Paper Information
Authors S. Narasimha, M.Sushama
Read Journal Click Here
Read Paper Click Here
Page No. 1 to 9

In present days Technological advancement and its incorporation is becoming a significant role in human life. Now Electrical power is very precious but due to the addition of Inductive load the reactive power is increasing rapidly as a result the industrialization has been affecting the efficiency of the electric power system. To minimize the reactive power consumption the power factor d...
Paper Information
Authors Md.Faysal Chowdhury, Sayeedul Mursalin, Mohammad Jubair Hossain, Omor Ahmed Dhali
Read Journal Click Here
Read Paper Click Here
Page No. 11 to 15

We introduce all-optical multicasting characteristics with wavelength conversion based on all-optical triode using two full bands tunable distributed-feedbacklaser diode module at a transfer speed of 10 Gbps to a non-return-zero 231-1 pseudorandom bit sequence system. This multi-wavelength converter device can simultaneously provide two channels of output signal with the support of non-i...
Paper Information
Authors Siti Aisyah Azizan, M. Syafiq Azmi, Yoshinobu Maeda
Read Journal Click Here
Read Paper Click Here
Page No. 1 to 11

n this paper we explain the suboptimum channel equalization approach. This approach employ linear transversal filter that we will explain. This filter structure has computational complexity that is linear with the order. This filter is shown in figure 1. Its input is the sequence v k, its output is the estimate of the output sequence Ik. The estimate might be expressed as The estimate I ...
Paper Information
Authors Dr. Ziad Sobih
Read Journal Click Here
Read Paper Click Here
Page No. 13 to 26

The transmission of electrical power is an essential stage in the delivery of electricity to end users, in that; it serves as the link between the generating stations and the final consumers. However, a significant amount of the generated power is lost in the transmission process. These losses often result in reduced transmitted power, increased operational costs and subsequent penalties...
Paper Information
Authors Kingsley Bediako Owusu, John Kojo Annan, Emmanuel Effah, Fred Kwame Tweneboah-Koduah
Read Journal Click Here
Read Paper Click Here
Page No. 17 to 24

In this paper we optimise the performance of microchannel heat sink with upper flow arrangement of flow at entrance and exit. The performance of micro channel heat sink is directly affected by the pumping power and the thermal resistance. Here we flow from the upper section and optimise to be very low pumping power and thermal resistance. The aspect ratio and the hydraulic diameter of th...
Paper Information
Authors Neeraj Kumar, Dilbagh Singh
Read Journal Click Here
Read Paper Click Here
Page No. 25 to 29

Here an advanced tutorial on power control issues in all generations of cellular system has been presented. Power control represents a key degree of freedom in design of cellular system, offering substantial benefits for efficient and fair of operation of the system, especially in energy efficient designs. It also supports several functionalities including QoS, bit error rate optimizatio...
Paper Information
Authors Tondare S.M, Veeresh G.K, Kejkar A.S
Read Journal Click Here
Read Paper Click Here
Page No. 25 to 29

Now-a-days quantum dot intermediate band solar cell (QD IBSC) is the most promising approach for increasing the efficiency of the solar cell. In this paper InxGa1-xN &GaAs based p-i-n reference cell and quantum dot intermediate band solar cell where AlxGa1-xAs is used in window layer have been studied for high efficiency and evaluated the performance with various parameters. Here quantum...
Paper Information
Authors Nezam Uddin, Md.Motiur Rahman, Tanvir Ahmed, Atiqul Islam
Read Journal Click Here
Read Paper Click Here
Page No. 13 to 16

With the reference for need of human beings to develop the low power dissipation based device which operates in very low power and reduce the cost for operation and design of device. This paper is an attempt to introduce the reader into the world of VLSI Technology and its implementation on Fabrication for designing the device. Our endeavor is to create the new invention on device which ...
Paper Information
Authors Mr. Prashant Kumar and Dr. Ajita Pathak
Read Journal Click Here
Read Paper Click Here
Page No. 17 to 24

This paper proposes a method for the choice of the injection node of an incoming power plant into an existing grid. The southern interconnected grid (SIG) of Cameroon is used as an example to demonstrate the advantages of using the proposed methodology. Given that the minimization of transmission losses constitutes a major cost-saving factor in electricity delivery, this work starts with...
Paper Information
Authors Tabe Moses, Tchuidjan Roger, Ngundam John, Manfouo Hervu00c3u00a9
Read Journal Click Here
Read Paper Click Here
Page No. 1 to 11